SP_banner_switch
Congratulations on ordering a Maxboost Screen Protector!
The following guide will help you with any questions or issues you may have with our screen protectors. For further assistance, please contact us at service@maxboostpower.com.

INSTALLATION TIPS

1. Wash hands before installation.
2. Any dust/debris left on the screen will lead to air bubbles or unsuccessful installation.
3. Do not touch adhesive side of the screen protector. 

INSTALLATION GUIDE

STEP 1: Wet Wipe

Wipe the screen clean with the included wet wipe.

01

STEP 2: Dry Wipe

Use the dry wipe to ensure all dust and liquid have been removed.

02

STEP 3: Dust-Absorber Sticker

Dab the sticker side of the dust-absorber to eliminate any debris on the screen.

03

STEP 4: Alignment

Carefully align the screen protector to the screen with the tab facing down.

04

STEP 5: Hinge Stickers

Place the included hinge stickers on the side of the protector and the Switch.
_

05

STEP 6: Screen Protector

Flip over the protector and remove the bottom protective layer by pulling way the rectangular tab.

06

STEP 7: Put it On

Without touching the sticky side of the protector, gently flip the protector back over and onto the screen.

07

STEP 8: Finishing Touches

Gently remove any air bubbles by pushing them to the edges of the screen. Your Switch is now protected!

08