SP_banner_switch
Congratulations on ordering a Maxboost Screen Protector!
The following guide will help you with any questions or issues you may have with our screen protectors. For further assistance, please contact us at service@maxboostpower.com.

INSTALLATION TIPS

1. Wash hands before installation.
2. Any dust/debris left on the screen will lead to air bubbles or unsuccessful installation.
3. Do not touch adhesive side of the screen protector. 

INSTALLATION GUIDE

STEP 1: Wet Wipe

Wipe the screen clean with the included wet wipe.

01

STEP 2: Dry Wipe

Use the dry wipe to ensure all dust and liquid have been removed.

02

STEP 3: Dust-Absorber Sticker

Dab the sticker side of the dust-absorber to eliminate any traces of debris on the screen.

03

STEP 4: Put It On

Peel half of the bottom protective layer (tab 1) and align the screen protector to the screen.

04

STEP 5: Put It On

Slowly pull away the remaining bottom protective layer while ensuring the protector is aligned to the screen.

06

STEP 6: Put It On

Once the screen protector is attached to the screen, remove the top protective layer (tab 2).

06

STEP 7: Squeegee

Using the squeegee, gently push down on the edges of the protector to ensure proper adhesion.

07

STEP 8: Finishing Touches

Remove any remaining air bubbles. Your switch is now protected!

08