SP_banner_s8
Congratulations on ordering a Maxboost Screen Protector!
The following guide will help you with any questions or issues you may have with our screen protectors. For further assistance, please contact us at service@maxboostpower.com.

INSTALLATION TIPS

1. Wash hands before installation.
2. Any dust/debris left on the screen will lead to air bubbles or unsuccessful installation.
3. Do not touch adhesive side of the screen protector. 

INSTALLATION VIDEO

INSTALLATION GUIDE

STEP 1: Prepare

Turn off your device.

01

STEP 2: Prepare

Wipe screen with wet cloth then dry cloth.

02

STEP 3: Dust-Absorber Sticker

Dab the sticker side of the dust-absorber to eliminate any debris on the screen.

03

STEP 4: Liquid Spray Bottle

Shake the liquid spray bottle and spray your fingers on both hands.

04

STEP 5: Screen Protector

Peel off protective later (with tab) of screen protector.

05

STEP 6: Liquid Spray Bottle

Completely spray the sticky side of screen protector.

06

STEP 7: Screen Protector

Quickly place screen protector over phone.

07

STEP 8: Alignment

Move screen protector around to align with the cutouts of your device.

08

STEP 9: Do Not Attach

At this time, DO NOT attach screen protector to curved edges of your device.

10

STEP 10: Squeegee

Use squeegee to gently push out air bubbles and excessive liquid.

09

STEP 11: Wait to Dry

Wait 20-30 mins for the remaining liquid to dry.

13

STEP 12: Attach Screen Protector

After 20-30 mins, gently push down the screen protector to curved edges of your device.

12

STEP 13: Squeegee

Again, use squeegee to push out remaining bubbles and liquid.

09

STEP 14: Finishing Touches

Leave phone untouched for 6-8 hours for it to completely dry. Any remaining bubbles and water stains will disappear. Your device is now protected!

12